Skip to main contentSkip to footer

Reverse engineering

Reverse engineering services in Sydney

No drawings for a broken or discontinued part? We model it in CAD and print the replacement.

Made in our Sydney workshop and shipped Australia-wide.

From an existing part to a CAD model

We 3D scan the part, in our workshop or at your site, then model it as a clean CAD file with real dimensions (STEP). You can change it, print it or send it to any manufacturer.

If you only need the shape, a scan file on its own may be enough. The 3D scanning estimator gives a price range for either.

Get a 3D scanning estimate

An engineer at a bench checking a small part against printed technical drawings, seen from above

No sample? Photos and measurements can work

If the part can't come to us, or there's only half of it left, send clear photos from a few sides with the main measurements. A drawing or sketch with dimensions helps too. We'll tell you whether we can model it from that before you pay anything.

Replacement parts, printed in our workshop

Once the model is right we can print the part for you. FDM on our Bambu Lab H2S printers suits brackets, covers and jigs, resin on the Formlabs Form 3L gives fine detail and a smooth finish, and SLS nylon on the Formlabs Fuse 1 makes strong parts with no support marks. We'll suggest the one that suits the job.

Already have a CAD file? Upload it on the quote page for an instant price.

Get an instant 3D printing quote

What to send us

Use the contact form and attach up to five files: photos (JPG, PNG, WebP or HEIC), drawings (PDF, DXF or DWG) or any 3D file you already have (STL, STEP, OBJ, 3MF, GLB or GLTF). Tell us what the part does and how many you need.

Reverse Engineering questions

How much does reverse engineering cost?

Each job is quoted by hand, because it depends on the part. If we scan the part first, the estimator on our 3D scanning page gives a price range for the scan and the CAD model.

Do I need to send you the part?

It's the best way, and we can also scan it at your site in Sydney. If neither works, photos with measurements are often enough, and we'll tell you if they aren't.

What file do I get?

A CAD model in STEP, with real dimensions, that you can edit or send to any manufacturer.

Can you print the part as well?

Yes. We print in FDM, resin and SLS nylon in our Sydney workshop and post Australia-wide.

What's the difference between 3D scanning and reverse engineering?

A 3D scan records the shape of the part as it is. Reverse engineering turns that into a clean CAD model with real dimensions, which you can change and make again.

Can you sign an NDA?

Ask us through the contact form before you send anything about the part.

More answers on our FAQ page.

Need a part remade?

Send photos, measurements or files through the contact form and we'll reply with a price.

Contact us