Skip to main contentSkip to footer

The workshop

Our machines

Every order is made on these machines in our Sydney workshop.

FDM 3D printers

Melted filament, laid down layer by layer.

About FDM printing →
  • Bambu Lab H2SFDM

    Bambu Lab

    H2S

    • 340 × 320 × 340 mm build volume
    • Enclosed, heated chamber
    • PLA, PETG, ASA and carbon fibre nylon
    • Layers from 0.12 mm
  • Bambu Lab P1SFDM

    Bambu Lab

    P1S

    • 256 × 256 × 256 mm build volume
    • Enclosed CoreXY
    • Small and mid-size parts
  • Creality Ender 5 MaxLarge-format FDM

    Creality

    Ender 5 Max

    • 400 × 400 × 400 mm build volume
    • Our largest build volume
    • Big single-piece parts

Resin 3D printers

Liquid resin cured by light, for fine detail.

About resin printing →
  • Formlabs Form 3LLaser SLA

    Formlabs

    Form 3L

    • 335 × 200 × 320 mm build volume
    • A laser draws every 0.1 mm layer
    • Standard and engineering resins
    • ESD and flame retardant resins upon request
  • Formlabs Form 3BLLaser SLA

    Formlabs

    Form 3BL

    • 335 × 200 × 320 mm build volume
    • Large-format laser SLA
    • Runs the same resins as the Form 3L
    • Formlabs BioMed resins upon request
  • Anycubic Photon P1 MaxLCD resin

    Anycubic

    Photon P1 Max

    • 285 × 214 × 300 mm build volume
    • 14 inch 12K screen
    • Cures a whole layer at once

Resin washing and curing

Every resin part is washed, then cured.

About resin printing →
  • Formlabs Form Wash LResin wash

    Formlabs

    Form Wash L

    • Washes uncured resin off printed parts
    • Stirs the solvent with magnetic impellers
    • Takes a full Form 3L build platform
  • Formlabs Form Cure LResin cure

    Formlabs

    Form Cure L

    • Cures parts with heat and UV light
    • Heats up to 80 °C
    • Rotating turntable for even exposure
    • Parts up to 320 mm tall

SLS 3D printer

A laser fuses nylon powder, with no supports.

About SLS printing →
  • Formlabs Fuse 1SLS nylon

    Formlabs

    Fuse 1

    • 165 × 165 × 300 mm build volume
    • Nylon 12 GF powder
    • 0.11 mm layers
    • No support marks

Laser cutters

Flat sheet, cut and engraved.

About laser cutting →
  • xTool P2SCO2 laser

    xTool

    P2S

    • 55 W CO2 laser
    • 600 × 308 mm work area
    • Acrylic, wood and leather
    • Twin cameras for placement
  • xTool MetalFab 1200WFibre laser

    xTool

    MetalFab 1200W

    • 1,200 W fibre laser
    • 610 × 610 mm cutting bed
    • Cuts and welds steel, stainless and aluminium

Have a part to make?

Get an instant quote