Skip to main contentSkip to footer

3D scanning

3D scanning services in Sydney

We 3D scan parts in our Sydney workshop or at your site. Scans start at $100.

Made in our Sydney workshop and shipped Australia-wide.

Get a 3D scanning estimate

A few questions gives you a price range. Prices include GST, and there's nothing to pay now.

Step 1 of 8

Step 1: How we scan it

Post it to us, or we come to you.

How we scan it

Your estimate

From $100

Pick a size to see your range.

No payment now. We confirm the price first.

What happens next

  1. 1. Send your request
  2. 2. We email your priceWith a link to pay the 50% deposit.
  3. 3. You post the part in
  4. 4. Pay the balance, get your files

On-site 3D scanning in Sydney, or post it in

We come to you within 40 km of our Chipping Norton workshop. That takes in Liverpool, Bankstown, Fairfield, Wetherill Park, Parramatta, Ingleburn, Sutherland, Blacktown, Campbelltown, the Sydney CBD and Penrith, with a call-out from $100. Type your address into the estimator to see yours.

Further out, or anywhere else in Australia, post your part to our workshop at your own cost. Return postage is confirmed in your quote.

What we can scan

Pick the size that's closest in the estimator. Anything up to about 60 cm on its longest side gets a price range straight away. Bigger than that, like a car bumper or a door, we measure first and quote by hand.

Most jobs are a part that needs remaking or changing: a broken or worn piece with no drawings, something that has to fit around an existing part, or an object you want copied or resized.

Part sizes in the estimator
SizeLongest sideAbout as big as
SmallUp to 10 cma car key or a coffee mug
MediumUp to 30 cma shoe or a kettle
LargeUp to 60 cma bike helmet or a microwave

Scan to CAD: a scan file or a CAD model

A scan file (STL, OBJ or PLY) is the part's shape as scanned, ready to measure or print.

A CAD model (STEP) has real dimensions, so you can change the part or send it to a manufacturer.

Need it printed? Your first print is included, and we quote more copies after the scan.

See 3D printing prices

How a scan job works

Answer a few questions in the estimator and add some photos of the part. You see a price range as you go, and nothing is paid online.

We check your photos and email a confirmed price. Once you accept it, pay 50% to start and the rest when the work is done, or pay in full up front for 5% off. Then you post the part in, or we come out on the day you booked.

Reverse engineering a part

When you need a part remade, the scan is only the start. We model it as a clean CAD file with real dimensions and can print the new part in our workshop.

Reverse engineering services

3D Scanning questions

How much does 3D scanning cost in Sydney?

From $100 per part. The estimator on this page prices yours from its size and what you need.

Do you come out to scan on site?

Yes, within 40 km of Chipping Norton. The call-out starts at $100, and the estimator shows yours from your address.

How do I book a visit?

Pick a day and a start time in the estimator, at least 2 days ahead. Times already booked are greyed out. We confirm yours in the email with your quote, and a weekend visit doubles the call-out.

Can I send my part from outside Sydney?

Yes. Post it to our workshop from anywhere in Australia, at your own cost. Return postage is confirmed in your quote.

How big a part can you scan?

The estimator prices parts up to about 60 cm on their longest side. For anything bigger, send us photos and we'll measure it and quote by hand.

What files do I get?

A scan file in STL, OBJ or PLY. If you add a CAD model, you also get a STEP file with real dimensions that you can edit.

Can you turn a scan into a CAD model?

Yes. You get a CAD model (STEP) with real dimensions that you can edit.

Can you 3D print the part after scanning?

Yes. Your first print is included in the price, and we quote more copies after the scan.

When do I pay?

After you accept the confirmed price. Pay 50% to start and the rest when the work is done, or pay in full up front for 5% off.

What if it doesn't fit?

Every quote includes one free revision. Tell us what's off and we fix it at no charge.

What if you can't scan my part?

You get a full refund, and we post your part back at our cost. If the scan works but the CAD model can't be made, you keep the scan and we refund the CAD model.

Who pays postage?

You pay postage to our workshop. Return postage is confirmed in your quote.

More answers on our FAQ page.

Have a part to scan?

Use the estimator above, or send us photos and we'll reply with a price.

Contact us